Instron 34FM-100, Preinstallation Manual

Page: 35 / 76

35
Checklist for site preparation
Product Support: www.instron.com
Checklist for site preparation
The following checklist provides a quick summary of items that should be considered
when planning and preparing the site location of your testing system. Additional
information regarding each item below is provided within this manual. If you need more
specific information, contact Instron
®
Service or your local Instron
®
office for
assistance.
Not all computers are compatible with Instron testing systems. If you intend to purchase
a computer from an outside vendor, contact
Instron
®
Service to verify its compatibility.
Additional charges may result from service that is required to evaluate or reconfigure
non-approved computers.
Site location
•
Floor is able to support the weight of the frame, and its computer components.
•
Environment complies with the specifications for your specific model:
•
Operating temperature
•
Storage temperature
•
Humidity
•
Atmosphere
•
The required power supply is available and is compatible with the electrical
requirements for your specific model.
•
Electrical outlets are within the maximum distance requirement to the load frame’s
location.
•
Phone lines are located within the general testing area so that users can call
Instron
®
directly from the testing area. It is also suggested that network drops, or
digital phone lines, be within the general testing area.
•
Ceiling clearance is adequate for the load frame, including the additional space
necessary to lift and move the frame by either a forklift or crane.
•
Location provides sufficient accessibility for routine maintenance (refer to “Frame
location” on page 26 ).
•
Employees are adequately trained to operate the load frame and its computer
system.