CPR Maestro
7
The CPR Maestro is an accessory from Eazy PRO, created
to help rescuers perform compressions in accordance with the latest CPR
recommendations. Its sensors measure the frequency and depth of chest
compressions, providing the user with real-time feedback. These information
are displayed on CPR Maestro and Eazy PRO screens and through sound
recommendations.
Using the CPR Maestro
Note: Because it is an accessory, it can not be used by itself. Only con-
nected to Eazy PRO.
The CPR Maestro parameter must work on DEFRIBRILLATION, CHAR-
GE AUTO SEQUENCE and AED modes. On AED mode, the messages on
screen and the audible ones will only be presented after the orientation
“Perform CPR for 2minutes.
To turn off the equipment, simply press the ON/OFF button for 3 seconds.
The parameter will be automatically turned off on the Eazy PRO screen.
1 – Connect the CPR Maestro to Eazy PRO, using the input indicated below,
located on the side of the equipment.
2 – Place the device on the patient’s chest, according to the image below.
This step is important and must always be followed. When the equipment
is initialized, the CPR sensors are calibrated, enabling the evaluation of
the compressions. The initialization with the device out of the recommen-
ded position may cause incorrect evaluations.
3 – Press the ON/OFF button, on the side of the equipment. At this moment, the
equipment is not ready to be used yet.
4 – A message on the CPR MAESTRO will be displayed to confirm that the device
is positioned correctly in the patient's chest, where compressions will be performed.
If it is, press the ON / OFF button again and start compressions.
More information on this topic is available in the Eazy PRO User Manual
present on the CD which accompanies the product.
22
