background image

4

Use Instructions

To close stroller:

Pull back on the side latches until they clear the
locking pegs. The stroller will automatically fold
when handle is pushed down or when the stroller
is lifted off the ground (Picture I).

To engage rear brakes:

Step lightly on the levers next to the rear wheels
until the cogs of the brakes engage the cogs of
the wheel. Repeat on other side. To release
brake, lift levers with toe until cogs disengage
(Picture J).

Proper use of seat height adjustment,
shoulder straps and waist strap:

WARNING:

Avoid Serious Injury from

falling or sliding out. Always use seat belts

1. Place child in seat. Adjust the seat height by

pulling or loosening straps located on the
sides (Picture K).

2. Buckle waist strap around child’s waist and

adjust to a snug fit (Picture K).

3. Make sure crotch strap buckle is between 

the child’s legs, adjust length by sliding strap
through plastic slide. Place shoulder straps
over child’s shoulders and buckle into center
crotch buckle. Adjust shoulder straps to a 
snug fit by sliding strap through plastic slide
(Picture L). Replace padded covers over the
shoulder straps.

J

K

L

I

Side Latch

Locking Peg

Belly Bar

Side Latch

Rear Pouch

Child’s Mesh
Foot Rest

Rear Brakes

Shoulder Straps

Seat Height
Adjustment
Straps

Waist Strap

Seat Height
Adjustment
Strap

Waist Strap

Center Crotch
Buckle

Shoulder Strap
without Padded
Covers

Waist Strap

Center
Crotch
Buckle

Summary of Contents for SB150







Reviews: