background image

 

11

Removal of the trailer from the bike 

1.  Remove children and all cargo from inside the passenger compartment. 
2.  Unclip the tow bar safety strap from the “D” ring.  
3.  Loop the strap back around the bike frame tube so that the strap is free of the bike frame. 
4.  Clip the end of the strap back on to the tow bar “D” ring. 
5.  Remove the quick-release pin from the tow bar coupler. 
6.  Slide the tow bar out of the tow bar coupler plate and re-insert the quick-release pin into the holes at 

the end of the tow bar.  The coupler plate may remain attached to the bike frame. 

7.  Set the front end of the trailer on the ground. 

 

Storage 

1.  Remove the flag and pole and separate the three sections.   
2.  If handlebar is present, remove the handlebar and replace the pins in the brackets. 
3.  Release the quick-release lever on each rear wheel axle. 
4.  Remove the rear wheels and set them to the side. 
5.  Unscrew the lock knob of the front wheel assembly and separate the front wheel from the tow bar.  

Set the wheel aside. 

6.  Release the tow bar quick-release latch at the front corner of the trailer. 
7.  Fold the tow bar back underneath the trailer and press the tow bar into the bracket to secure it. 
8.  Place all loose items inside the passenger compartment, and close the rain cover. 
9.  Loosen the straps under the front edge of the sling seat.  Then, release the sling seat crossbar 

joiners and carefully fold the trailer compartment flat.  

Use caution to avoid getting pinched!

 

10. Store the trailer in a dry place.  If the storage area will get hot, release some of the air from the tire 

inner tubes to prevent excessive expansion or popping. 

 

Prior to next use 

1.  Make sure that all parts are in good working order, and that no parts are missing.  

Do not use this 

product if any parts are broken or missing!

 

2.  Check that all fasteners are securely tightened. 
3.  Check the tires to make sure they have the correct PSI. 
4.  If you have any questions concerning the proper use of this product after it has been stored, please 

contact a qualified technician. 

 
 
 
 
 
 
 
 
 
 
 
 
 

Please see the next page for information about contacting Pacific Cycle 

and ordering accessories for your bicycle trailer. 

 
 
 
 
 
 
 
 
 

Summary of Contents for Rocket













Reviews: