6
Attach the Canopy
1.
Bring the front panel up and fasten the
buckles on each of the side walls.
2.
Bring the back panel up and fasten the
buckles on each of the side walls. Pull the
straps on the side walls to tighten.
3.
Attach the hook and loop fasteners on the
canopy to the strips on the front and back
frame walls.
4.
Stretch the canopy over the trailer frame.
The bug screen should face towards the front
of the trailer.
5.
Fasten the three snaps on the front, back and
top of the canopy to the side walls (six snaps
total).
Snap
Snap
Hook
and loop
Canopy
Unroll weather shield
from elastic (if needed)
Hook
and loop
bug
screen
Fasten buckles to side wall
Extend and Secure the Tow Bar
1.
Pull the tow bar
locking latch down
and out of the bottom
latch slot.
2.
Extend and Secure
the Tow Bar.
3.
Rotate the tow bar
until it rests on the
front end of the frame.
4.
The tow bar locking
latch should snap into
the top slot.
5.
Check that the tow bar
is securely locked into
place.
Tow bar
Locking
latch in
down
position
Locking
latch in up
position
Snap
