How to secure the network traffic ?
I.
Press the pairing button for 5 seconds until the signal lights flash once. The
Adapter is now ready to negotiate a pairing password with another adaptor.
II.
Press the pair button for 1 second, and then release it. The power LED
should start to flash - signaling that it is waiting to be paired with another
adaptor. The pairing mode is active for 2 Minutes. Do the same to the other
IN-LAN device, press one second and release, and wait for the two devices to
pair successfully.
III.
The pairing was successful when the power LED changes from flashing to
constant on, the data LED stays constant on.
To exclude one IN-LAN adaptor from an existing network, press its
Pair But-
ton
for more than 10 seconds. The device will be assigned with a new random
encryption key and will no longer be able to access the network. To integrate
the adaptor into a different IN-LAN adaptor network, follow the steps de-
scribed above.
6
Building a Public Network 4
l
Summary of Contents for IN-LAN 500p
Page 2: ...LAN 500p ...
Page 14: ...INSTAR Quick Notes ...
