REGULAR DAILY USE
Switch boiler on and wait for the screen to turn white and show “READY” message
and dispense button to
turn red. The water will then be at the correct temperature. (the unit will not dispense until the water has
reached temperature and button is illuminated)
Dispense water by pressing illuminated push-button.
OPTIONAL CUP-SUPPORT BRACKET & SPILL-TRAY KIT
An optional
CUP-SUPPORT BRACKET & SPILL-TRAY KIT
for the WMS6PB is available from Instanta Spares
department (Part No: DBST1/KIT). This support bracket attaches to the underside of the boiler-case allowing
vessels to be placed onto a spill-tray, located beneath the cup recess. This removes the necessity of holding
the cup/teapot by hand when filling.
FILTER COUNTER
(Optional if a filter or softener has been fitted):
If an external filter/softener is fitted to the unit there is an optional filter-counter installed in the software.
This counter measures the water passing through the boiler and reminds the customer (via the display screen)
to change the filter when required.
Note: This counter is
set to ‘Off’ as standard.
To enable filter-counter, proceed as follows:
-
Turn machine off on front panel.
-
Press & hold “on/off” button (for approximately 12 seconds) until red screen shows “PR” in
centre of
screen, then release button. Temperature setting is displayed.
-
Press & hold button (long push) for approximately 5 seconds until screen changes to
show “empty
filter symbol
” (default filter setting).
-
Press button (short push) to scroll between the different filter settings;
SOFT (13001 litres)
MEDIUM (9001 litres)
HARD (6001 litres)
EMPTY FILTER SYMBOL (No Filter counter)
-
With the required filter setting selected, Press & hold button (long push) for 4 seconds to save.
-
Press & hold button (long push) for approximately 6 seconds until display goes blank.
-
Turn machine back on again.
-
TO RE-SET & CONFIRM NEW SETTINGS;
…P
ress & hold button, screen will go blank but continue to
hold, until “READY” message is displayed on a red screen.
-
The unit can then be switched back on and used.
If in doubt as to the hardness of water supplied in your area, consult your local water authority
PREVENTATIVE MAINTENANCE:
AQ35/KIT
–
The Instanta AQ35 high-flow multi-filter delivers the best quality of water by removing sediment
and impurities such as chlorine. The filter also reduces scale build-up which results in lower running costs,
improved energy efficiency and longer life expectancy. Filter capacity: up to 13,500 litres
Available from Instanta Spares Department: 01704 501114
CLEANING
Clean the external surfaces of the boiler regularly to maintain good hygiene
Wipe external surfaces of the boiler with a damp cloth. Do not use abrasive materials on the outer surfaces.