9
Your Multi-function coffee maker
Plugging in your Multi-function coffee maker
Before you plug in your Multi-function coffee maker, make sure your
Multi-function coffee maker is on a dry, stable, and level surface. Once the
Multi-function coffee maker is plugged in, press the power button, located
above the
Bold
button. Your device is now in Function Selection mode.
From here, you can begin brewing. See page 13 for brewing instructions.
To turn off the Multi-function coffee maker, press the
Power Button
.
After 30 minutes of inactivity, your coffee maker will enter standby mode.
The LED control panel will dim. After another 2 hours of inactivity, the
LED panel will shut off.
Sound Settings
You can turn button-pressing sounds and reminder beeps on or off.
1.
Make sure your Instant Multi-function coffee maker is on.
2.
Press and hold the
4 oz
and
6 oz
espresso buttons at the same time
for 3 seconds.
3.
Wait for the
4 oz
and
6 oz
buttons to blink twice.
To turn button-
pressing sounds on, repeat the above instructions — the
4 oz
and
6 oz
buttons will blink three times.
Note: The device failure sound cannot be deactivated
Altitude Mode
If you’re using the Instant Multi-function coffee maker at +5,000 feet sea
level, enable
Altitude Mode
before you brew.
To turn
Altitude Mode
on
1.
Make sure your Instant Multi-function coffee maker is on.
2.
Press and hold the
8 oz
and
10 oz
buttons at the same time
for 3 seconds.
3.
Wait until the
8 oz
and
10 oz
buttons blink three times.
140-6013-01-0101_DualPodPlus_CoffeeMaker_US_Manual_FINAL.indd 9
140-6013-01-0101_DualPodPlus_CoffeeMaker_US_Manual_FINAL.indd 9
7/14/21 4:10 PM
7/14/21 4:10 PM
