9
10
4
4
13
20
15
15
X4
X4
9
10
13
N
12
10
13
9
10
4
4
6
IMPORTANT: Make sure you use in this step the correct sliders (4) which are longer and have more holes than the sliders (22).
Use screws (B) to assemble the scanner sliders (4) to the top sets of slider holes on panels (9) and (10) in the following order:
First open the slider slowly until the first hole on the front of the slider is visible thru the big opening,
and attach to the front hole on the panels as shown.
Then open the slider completely and attach to the 2 back holes as shown.
Place the drawers’ box bottom panel (13) and the CPU box bottom panel (20) upside-down,
and attach the studs (15) as shown.
4
6X40 MM
A
FRONT
FRONT
2
L
6X25 MM
FRONT
BACK
Attach the bolts (L) to the drawers’ box bottom panel (13),
then assemble the back panel (12) as shown.
Then attach the grommet (N) to the back panel (12).
Back of panel
(13)has 2 holes
for next step.
Attach the bolts (A) to the drawers’ box bottom panel (13),
then assemble the Left and Right panels (9) and (10) as shown.
P.8
Summary of Contents for IDA-8211
