Customer Service: 1-866-916-8188
(USA) CSA (US) CORP
16801 E Gale Ave. Unit E,
City of Industry, CA 91745
(Canada) CSA (US) CORP
202-30 Royal Crest Court,
Markham, ON L3R 9W8
If you have any problems, please email or call
our Customer Service team, 9am to 5pm EST or
e-mail them, [email protected]
Return Policy. Do not return product to store.
If you have any problems, call this customer
service number for instructions.
Instructions for Use
Before using the InstaJACK
turn off the ignition, activate the hazard
warning flashers, and set parking break.
•
In automatic cars:
Put car in park.
•
In manual transmission cars:
If car is facing downhill, put car in
reverse gear. If car is facing uphill, put car in first gear.
Follow the tire changing instructions that are described in your
Vehicle-Owner’s Manual.
Plug the InstaJACK into the 12V Cigarette lighter socket of the vehicle.
The green light indicates that you have a good connection. If light
does not illuminate. Reset the plug in the socket until the green
indicator light comes on.
•
Before raising the car,
remove the wheel’s hub cap, and use a lug
wrench to break the tension on the lug nuts on the wheel. Do not
remove the lug nuts, just loosen them.
If it is dark, or in poor visual conditions, turn on the BriteLight and
position the InstaJACK to illuminate the wheel when removing the
lug nuts, or to light your work area under the car when positioing the
InstaJACK
• Consult your vehicle-owner’s manual and find the correct location
under the vehicle. Place the InstaJACK under the car along side the
wheel that needs changing.
Flip down the InstaJack Easy-View Mirrors and use these to see under
the car to accurately position the InstaJACK.
Press the InstaJACK “UP” control and watch as the InstaJACK rises
under the car. Use the Easy-View mirrors and adjust the position of
the InstaJACK as the jack rises. Make sure that the rising jack connects
exactly on the jack-location position that is described in your Vehicle-
Owner’s Manual.
Keep pressing the “UP” control until the car wheel lifts off the floor.
Keep raising the car until it is high enough to get the inflated spare
wheel in place. The Jack will switch off automatically if you extend it
to its limit.
While the car is lifting always be alert. It is possible for any jack to
slip and thus allow the car to fall back to the ground. While the car
is in the air do NOT lean on the car or push it. Never enter a car
while using the InstaJack.
• Change the wheel as indicated in the Vehicle-Owner’s Manual.
•
Before lowering the car,
put the lug nuts back on the wheel. Use a lug
wrench to tighten the lug nuts on the wheel, as described in your
Vehicle-Owner’s Manual
• When finished, use the “DOWN” control to bring the car down.
Be cautious when lowering the Jack. Do not get fingers or other
items near to the InstaJack. Be careful not to trap the power cord.
• Double check that the lug nuts are tightened. Re-tighten the lug nuts
and replace the hub caps.
1
2
3
4
5
Read Vehicle’s Manual
for Jack Placement and
Vehicle Safety Precautions!
1
2
3
4
5
Jack Dimensions:
26.42” x 5.36” x 7.58”
67.10 x 13.60 x 19.25cm
Weight:
7.4 Kg. (16.28 lb)
Case Dimensions:
27.64” x 12” x 6.5”
70.21 x 30.48 x 16.51cm
Case and Jack Weight:
9.6 Kg.(21 lb)
Power:
12V DC from vehicle
cigarette lighter socket.
Current:
15 Amp max
15 Amp fuse installed
Capacity:
Cars Weighing
3.5 Tons/7000lbs/3175Kg
Range:
4.9in - 17.5in
12.5cm - 44.5cm
Power Cable:
14.76 ft = ( 4.5 M )
Reaches all car wheels.
Specifications
Never use the vehicle’s 12V power socket to operate two
motorized tools at the same time. It will overload the fuses!
Before lifting a rear wheel...
Block BOTH front wheels.
Before lifting a front wheel...
Block BOTH rear wheels.
Important
www.InstaJACK.com
