background image

 

Note:  You must have the TF/SD card in inserted when the alarm is ON.    

A quick access to delete all the alarms: press “Mode” to clear all the alarms. 

A quick access to set the alarm clock ring (apply to alarm 1/2): 

a.

 

In USB/SD/RAD mode, press the alarm button in the remote, when the screen shows “AL1”, 

it is set as the ring. 

b.

 

Short press the alarm button twice, when “AL2” appears, setting finished. 

c.

 

Note that this quick access is only apply to alarm 1/2. 

13.

 

Snoozing Function 

a.

 

Press the volume knob or the snooze button of the remote, alarm will be paused for 5/10 

minutes, and ring again when countdown ends 

b.

 

Press any button except the volume knob and the snooze button to end the alarm  

Using the FM Radio 

1.

 

You can scan the FM band and save desired stations.  

a)

 

 Click Mode and select the FM function 

b)

 

Short press the 

Forward Track

 button to choose next channel,long press to delete the 

exsiting station 

c)

 

Short press the Back button to choose the previous channel,long press to top the station 

d)

 

 Long press Play on the radio or the remote control. The radio will automatically scan the 

FM band from 87.5-108.5MHz and save stations found as P01-P60. 

 The Instabox i90 can store 60 preset radio stations. 

2.

 

You can step through saved stations using the forward and back buttons on the front panel or 

on the remote. Select any previously stored channel by pressing the numbers (1-60) on the 

remote, then press Play. If no station has been saved in a selected channel 

Err

 will display. 

3.

 

You can semi-automatically scan and save FM stations:  

a)

 

Hold the forward or back button to scan through available radio stations. To save a 

selected station, press ‘DSP’ in the remote control. Your selection is saved in the next 

available preset position. 

4.

 

You may select any FM station directly by entering the station frequency then press Play.  

(e.g.: for 105.1MHz = Press 1051 + Play).  

5.

 

To momentarily mute the radio press the Play button on the remote or on the front panel. 

Note: The i90 external high gain antenna helps guarantee a high quality FM reception. Extend the 

antenna and position it for the best reception. 

Summary of Contents for i90










Reviews: