UK
NOTES
a. The screen should be connected to a suitable power supply, such as :
220V/50Hz, 230V/50Hz or 110V/60Hz, 120V/60Hz
b. The screen can be used with or without the remote control, using the control box or the RF
remote control.
c. The synchronous motor is installed on the right side of the casing where the screen folds up.
d. If the remote control is not provided, the screen can be operated directly using the control box
and the “UP/DOWN/STOP” buttons.
e. The screen will automatically stop when the fabric rolls up in the case or when it is completely
rolled down. The screen can also stop at any position you want.
f. The weight bar must be installed higher than 2 cm above the floor.
1. Plug the power supply. Press the “DOWN” button
of the control box or the remote control to roll down
the screen. Press the “STOP“ button when the screen
is at the expected position, otherwise the screen will
automatically stop at the down stop.
2. Press the “UP” button of the control box or the remote
control to roll up the screen. Press the “STOP”button
when the screen is at the expected position, otherwise
the screen will automatically stop at the up-stop.
III. OPERATING
CAUTION : If you don't use the screen for a long time, please unplug the power
supply. Do not pull out the wires.