background image

4. Use 1" lens to shoot night scenes. It is recommended to use 5.4K@30fps 

and raw photos. The picture quality of 4K@60 and 1080P@120 frames is not 

good enough. 

5. If you used a 1/2.3" lens to take a photo with the manual exposure 

parameter, first switch the exposure mode to auto exposure, then switch to 

the recording mode to shoot. Avoid some bugs. 

6, 1 / 2.3" lens 1080P@120fps gear position, the current settings exposure, 

white balance and other parameters will not take effect. 1080P@200 switching 

white balance does not take effect. Other resolution gears are normal. 

7. The current APP version will play a few errors when connecting to view the 

camera album, but it will not affect the use, and the album will disappear when 

the  error  pop-up  window  disappears.  This  bug  will  be  fixed  tomorrow. 

 

FCC Statement 

 

This device complies with Part 15 of the FCC Rules. Operation is subject 

to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation. 

 

NOTE: This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

Summary of Contents for CINORAH-A











Reviews: