Insta 256 Series, Operation And Maintenance Manual

Page: 7 / 28

6
FOR USE BY QUALIFIED PERSONNEL ONLY
4. Set the desired Pressure
Adjust the pressure crank handle
behind the top housing.
a. Turn the crank CLOCKWISE to
the pressure.
b. Turn the crank COUNTER-CLOCKWISE
INCREASE the pressure.
NOTE:
Increasing the pressure increases the
force required to close the platens. To
avoid user injury or damage to the
machine, do not attempt to force the
platens closed at very high pressure
levels.
5. Set the Application time
a. Press MODE to cycle to the time display.
b. Press SET to display the application time.
To increase the application time, hold
SET
and
UP
.
+
To decrease the application time, hold
SET and DOWN .
+
NOTE:
When lifting the handle, there might
be a popping noise. This is normal and
is caused by suction created between
the platen surfaces. During r
transfers, the noise will diminish.
FOR USE BY QUALIFIED PERSONNEL ONLY
crank handle located
to DECREASE
CLOCKWISE to
creasing the pressure increases the
force required to close the platens. To
avoid user injury or damage to the
machine, do not attempt to force the
platens closed at very high pressure
time display.
application time.
To increase the application time, hold
To decrease the application time, hold
Increase pressure
When lifting the handle, there might
be a popping noise. This is normal and
is caused by suction created between
the platen surfaces. During regular
transfers, the noise will diminish.
2
1
2
+
2
+
Decrease pressure
1
1