59
BIOS Setup
(2)
Modify the IP address acquisition mode of this port to DHCP through IPV4 source.
(3)
Select Exit -> Save Change Without Exit option to save, it takes effect immediately.
(b)
BMC static IP setting method:
(1)
Select Dedicated or Share BMC port.
(2)
Modify the IP address acquisition mode of this port to Static through IPV4 source.
(3)
Select IPV4 IP Address, press Enter, input IP, and press Enter to confirm; then set IPV4
Subnet Mask and IPV4 Gateway Address in the same way.
(4)
Select Exit -> Save Change Without Exit option to save, it takes effect immediately.
7.2.4 Security
Security interface is used to set the options related with administrative security, including
TPM, supervisor and user password settings, as shown in the following figure and table.
Security Interface Instruction Table
Interface Parameters
Function Description
Current TPM Device
Display current TPM device
TPM State
Display current TPM device status
Supervisor Password
Display supervisor password status
User Password
Display user password status
Set Supervisor Password
Set a supervisor password. The password length should be 10-20 characters,
and it must include uppercase letters, lowercase letters, numbers and special
characters at the same time.
Set User Password
Set a user password. The password length should be 8 characters, and it must
include uppercase letters, lowercase letters, numbers and special characters at
the same time.
Summary of Contents for NX5460M5
