18
Chapter Three System Setup
● PCH
Display PCH chip related information and set PCH chip parameters.
* SMBus Controller
This item is used to open or close system management bus, including [Enabled]
(default) and [Disabled] two items.
* Restore AC Power Loss
Set power supply status after system powers off abnormally. It includes the fol-
lowing setup items:
[Power off] (Default): the shutdown status which needs to start up manually.
[Last State]: the power down status.
[Power on]: the startup status.
* SCU devices
This item is used to open or close onboard SAS controller. It includes the follow-
ing setup items:
[Enabled] (default configuration): open onboard SAS controller
[Disabled]: close onboard SAS controller
* Onboard SAS Oprom
This item is used to open or close integrated SAS controller ROM, including [En-
abled] and [Disabled] (default configuration) two items.
When “SCI devices” item is set to <Disabled>, this item is automatically hidden.
When this item is set to be <Disabled>, it can connect 4 pieces of SATA hard
disks as storage. Please set this item as <Enabled> when the server is connected to SAS
hard disks or SATA hard disks as system disks.
* Onboard SATA RAID Oprom
This item is used to open or close integrated SATA RAID controller ROM, includ-
ing [Enabled] (default configuration) and [Disabled] two items.
● ME Subsystem
This menu is used to set ME subsystem.
* ME Subsystem
This item is used to open or close ME subsystem, when it is set to be [Enabled]
(default configuration), the user can check ME relevant information.
4.Server Mgmt menu
● Wait for BMC
This item is used to set up whether waiting for BMC startup or not, including [En-
Summary of Contents for NP5540M3
Page 6: ......
