61
Figure 3-57 Operation Screen
b.
Select
Go
and press <Enter> to view the list of existing virtual disks.
c.
Select the virtual disk to be associated and press <Enter>.
d.
Select
Enabled
and press <Enter>.
e.
Select
OK
and press <Enter> to enter the operation confirmation screen.
f.
Set
Confirm
to
Enabled
.
g.
Select
Yes
and press <Enter>.
The operation has been performed
successfully
appears.
h.
Press <Enter> to complete the configuration and return to the previous
screen.
3.4.3
Deleting HS Drives
Scenario:
If drives in the environment are insufficient, delete the existing HS drives to reset
them to HDDs.
Procedures:
1.
Log in to the management screen.
Summary of Contents for 3408 Series
