- 19 -
Monitoring and Maintenance
Monitoring
Indicator
When the 10GEM-001-FCOE series switch is running, users can monitor the status of host and each module by
inspecting corresponding indicators.
When the indicator of the master CM is yellow, it means the system has a fault, in which case you can determine
and eliminate the fault by viewing with the management software.
CLI Commands
The 10GEM-001-FCOE series switch allows you to monitor various system statuses by executing the appropriate CLI
commands, including:
Working status of host
Port configuration and status
Temperature status
For the monitoring commands, see
10GEM-001-FCOE series Switch Configuration Guide.
Hardware Maintenance
Expansion Module Maintenance
To replace a board, do replacement according to the instructions provided in
Product Installation
.
Replacing Lithium Battery
The built-in lithium batteries can support the real time clock of the 10GEM-001-FCOE series switch without external
power supply.
Please contact TAC for replacing lithium batteries. Technical staff will replace the battery of the same model.
Replacing Fuses
Please contact TAC for replacing fuses. Technical staff will replace the fuse of the same model.
