5
Step 1:
Open the box and check that no part is missing.
Step 2:
Connect the handle (2) to main frame (3) with 4X45 mm bolts (7) and 4XM8 nuts (6).
Please note that handles become wider at one end. The wider side should be away from the hover
kart in order to give yourself more freedom to move.
Necessary tools: Allen wrench 17 (11) and Spanner (13)
Step 3:
Connect the seat (1) to main frame (3) with 4 screws (8).
Necessary tools: Allen wrench 13 (12)
Step 4:
Connect the front pedal (4) to main frame (3) with knob (9). To adjust it to your height, lift the
knob (which has a spring system) slide the front pedal and place the knob into the most appropriate
hole for your height.
Now that your frame is in one piece, place a rubber protector on each of the bars that hold together
your hover kart. You will see that one side is longer than the other. This one goes on the inside to
prevent your hover kart from getting scratched.
Step 5:
Loosening the nut, adjusting the bars to fit your hover board and screwing the nut tight again.
The bars should match with your hover board.
