3
DESCRIPTION
When the connection is successful, the blue LED of the headset will flash 3 times. Then blue LED will flash
once every 7 seconds to indicate a device is connected.
Note: If the pairing is unsuccessful, please turn OFF the Headphones and then ON again and repeat the
connection procedure.
FUNCTIONS FOR BLUETOOTH HEADSET
Power on
In the off state, push switch button to “ON” position, blue light flash 3times and headset
beeps.
Pair connect
In the off state, long press multifunction button for 7S until red and blue light flash
alternately, using the mobile phone to search the Bluetooth device and connect, headset
beeps.
Answer calls
When there is an incoming call, short press multifunction button and headset beeps.
Hang up calls
On the line, short press multifunction and headset beeps.
Refuse calls
When there is an incoming call, long press multifunction button for 3S and headset
beeps.
Voice dial
On the standby state, long press multifunction button for 3S (need the mobile phone
support this function)
Voice transfer
On the line, long press multifunction button for 3S, the voice switch to mobile phone.
Using the same operation, the voice can switch to Bluetooth.
Redial the last dialed
number
On the standby state, dual- click multifunction button and headset beeps.
