4
CONTROL PANEL
Button
Function
Default value
Settings
ON / OFF
Turing on / off the device
Temp + / -
Temperature adjustment
35 °C
35 °C–48 °C
Red light
Turning on / off red light
Off
On
Bubble
Turning on / off bubbles
Off
On
LED display
Displays water temperature
USE
Before switching on, fill the bathtub with water. Never use the device if there is no water.
1. Check that no part is damaged (power cord, plug, etc.)
2. Place the device on a flat, dry surface.
•
Sit on a chair or chair. Never stand on the device.
•
Do not plug the device into the socket yet.
3. Fill the device with water. Never use the device if it is not filled with water.
•
Fill the device with a container.
•
Do not place the bathtub under the stream of water.
•
Be careful not to wet the control panel.
•
You can us
e 40 ° C water to speed up the heating.
•
Now plug the device into the plug.
CLEANING AND MAINTENANCE
•
Turn off the product and unplug it before cleaning.
•
Make sure the drain thread is closed and the cable is hidden.
•
Only wash the tray with a dry, soft cloth. Do not use aggressive cleaners.
•
Do not immerse the appliance in water.
STORAGE
•
Turn off the product, unplug it and allow it to cool down.
•
Dry the product properly.
•
Do not pull the device by the power cord.
•
For indoor use.
•
Do not store the product near heat sources.
TROUBLESHOOTING
Problem
Cause
Solution
