background image

 

 

USE 

1.  Hold down the power button for 2 seconds to switch the skipping rope to free mode. 

2.  If  you  do  not  use  the  skipping  rope  for  2  minutes,  you  will  switch  to  power  save  mode.  (you 

can wake up the skipping rope by pressing the button) 

3.  By  holding  down  the  button,  you  can  switch  modes  (free  mode,  jump  countdown,  time 

countdown). 

4.  In free mode, you can press the button to monitor the number of jumps and time. 

5.  In  jump  countdown  mode,  you  can  set  the  countdown  from  100  to  2000  by  pressing  the 

button. When done, you will be notified by a vibration. 

6.  In countdown mode, you can set the countdown from 1 to 10 minutes by pressing the button. 

When done, you will be notified by a vibration. 

7. 

The  skipping  rope  automatically  shuts  off  after  5  minutes  of  inactivity.  You  can  turn  off  the 

skipping rope by holding down the button for 10 seconds.

 

STORAGE 

 

Do not store the product in extremely cold places or in direct sunlight. 

 

Too low a temperature can damage the PVC cover layer, which can result in reduced product 

resistance. 

 

Direct sunlight can cause the surface layer to become too rigid. 

 

You can wind or hang the skipping rope for storage. 

Summary of Contents for Jumpsmart








Reviews: