Insportline IN 9100, User Manual

Page: 5 / 9

5
3 Pedal frame (L) 1
4 Pedal frame (R) 1
5 Pedal (L+R) 2
6 Bolt (M8X25) 2
7 Adjustment knob 1
8
Plastic bushing (Ǿ40)
4
9 Bolt cap 2
10 Bolt (M6 * 20) 2
11 Stopper 2
12 Bolt (M5 * 20mm) 4
13 Bolt (M6 * 40mm) 4
14 Bolt (M5 * 10mm) 1
15 Nut (M8) 4
16 Pulley bracket 1
17 Pulley (100) 1
18 Pulley bolt (M10 * 40mm) 1
19 Nut (M10) 1
20 Cable (355mm) 1
21 Oblique bushing (Ǿ38) 2
22 Computer 1
24 Magnet 1
PRODUCT OPERATION GUIDE
OPERATION PROCEDURE
1. Rotate the adjustment knob (Part: 7) to alter the pedal’s movement range.
2. Adjust the tension of the adjustment knob to ensure tension wire is well connected for proper function.
3. The computer will automatically shut off if there is no movement for 4 minutes.
4. The computer will automatically turn on when exercise commences.
5. All functions will automatically stop and a “STOP” sign will appear on top left corner of the computer
when there is no movement for 4 sections. Functions will recommence when you begin to exercise.
COMPUTER FUNCTIONS
SCAN Automatically scans each function in sequence.
TIME Displays the total time of the workout session starts from 00:00 – 99:59.
COUNT Displays the total number of steps taken during the workout session.
STRIDES/MIN Displays the repetitions (or strides) per minute during the workout session.
CAL Displays the calories burned during the workout session. NOTE: This is an approximate
measurement.