5
ASSEMBLY INSTRUCTIONS
•
Make sure the Metal Joint Plates (17) are mounted on the side of the Upright Frames (1&2)
and the Upright Frames are facing the same direction. Then securely fasten each Upright
Frame to the Back Up Horizontal Support (4) and Back Down Horizontal Support (5) use the
Bolts M10*75 (36), Washers (42) and Nuts (44) as shown.
•
Fasten the Down Joint Tube (7) to Back Down Horizontal Support (5) use the Bolts M10*75
(36), Washers (42), Lock Nut (45) and Spheral Head Pin (48) as shown.
•
Securely fasten the Front Support (8) to Front Down Tube (9) use the Bolts M10*75 (36),
Washers (42) and Nuts (44) as shown. Fasten the Down Joint Tube (7) to Front Support (8)
use the Bolt M10*75 (36), Washers (42) and Lock Nut (45) as shown.
•
Fasten the Main Frame (6) to the Back Up Horizontal Support (4) and Front Support (8) use
the Bolts M10*75 (36), Washers (42) and Lock Nuts (45) as shown.
•
Insert the Adjustable Barbell Support (3) to Upright Frames (1&2), then fasten with Adjustable
Pin M16 (32).
•
Insert the Adjustable Back Rest Support (13) through both vertical Uprights (1&2).
•
Attach the Seat Cushion (19) to the Main Frame (6) with Bolts M6*16 (39) and Washers (43).
•
Securely fasten the Leg Extension Beam (12) to Front Support (8) using the Bolt M10*75 (35),
Washer (42) and Lock Nut (45).
•
Insert Leg Extension Foam Tube (15) into the appropriate position (depending on the user
size) on the Leg Extension Beam (12) and push a Foam Roller (31) onto each end of the tube.
•
Attach the two Back Rest beam (14) to the Back-Rest Cushion (18) with Half Round Head
Screw M6*40 (38).
•
Attach the Back-Rest beam (14) to the Main Frame (6) with Bolt M10*140 (34), Washers (42)
and Lock Nut M10 (45).
•
Fasten each Butterfly Arm (10&11) to each of the uprights use the bolts M10*25 (37) and Big
Washers (41).
•
Insert the Butterfly Arm Foam Tube (16) through each butterfly arm and fasten it with the Bolts
M12*20 (33) and Washers (40), then push a Foam Roller (31) onto each.
