Insportline IN 4423 EVOTRON, User Manual, Page: 29 / 30

STEP 4
Slide the Vertical Seat Post (pt.3) into the seat post housing on the
main frame (pt.1). You will have to slacken the knurled section of
the Spring Adjustment Knob (pt.8) and pull the knob back and then
select and align holes for the desired height. Release the knob and
retighten the knurled portion.
STEP 5
First Connect the Sensor Wire(pt.15
、
17). Then, connect the
Pulse wire (pt.14
、
16).Slide the Computer (pt.13) onto a plate
of the Handlebar Post (pt.2).
Attach the Bracket cover (up)(pt.11) to the Bracket cover
(down) (pt.12) using two sets of Screw (ST4.2*9) (pt.22).and
Screw (ST4.0*16) (pt.23).
STEP 6
Slacken the Adjusting Knob (pt.8) and pull back both knobs
and locate the handlebar post (pt.2) in the housing on the
main frame (pt.1). Align the correct holes at the desired height
until the “stop” mark and then tighten the Adjusting Knob (pt.8).