45
END CAP
Ф
22.2*1.5
2
46
END CAP
40*20*1.5
2
Assembly Instruction:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above of this instruction sheet
you will find an explosion drawing with all single parts (marked with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
FIG.1:
Attach the Front Stabilizer(1) and the Rear Stabilizer(1) to the Main Frame(12) with Carriage Bolt (11), Domed
Nut(15) and Arc Washer(14).
FIG.2:
Connect the Sensor A1 and A2 and Tension Control wire B1 and B2 as shown in FIG.2, fix the Upright Post (7)
with the Main Frame (2) with Screw (26), Arc Washer (27). Install the fixing handlebar(10) on the Upright Post
(7) with Arc Washer (27), Domed Nut(36) and Screw(37).
Summary of Contents for IN 344
