background image

16 

 

require  a  compensation  for  all  the  costs  arising  from  the  repair.  The  cost  shall  be  calculated  according  to  the 
valid price list of services and transport costs. 

If  the  Seller  finds  out  (by  testing)  that  the  product  is  not  damaged,  the  Warranty  Claim  is  not  accepted.  The 
Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim. 

In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by the Seller, 
the Seller shall fix the reported defects by means of repair or by the exchange of the damaged part or product for 
a new one. Based on the agreement of the Buyer, the Seller has the right to exchange the defected Goods for a 
fully compatible Goods of the same or better technical characteristics. The Seller is entitled to choose the form of 
the Warranty Claim Procedures described in this paragraph. 

The  Seller  shall  settle  the  Warranty  Claim  within  30  days  after  the  delivery  of  the  defective  Goods,  unless  a 
longer period has been agreed upon. The day when the repaired or exchanged Goods is handed over to the Buyer 
is considered to be the day of the Warranty Claim settlement. When the Seller is not able to settle the Warranty 
Claim within the agreed period due to the specific nature of the Goods defect, he and the Buyer shall make an 
agreement about an alternative solution. In case such agreement is not made, the Seller is obliged to provide the 
Buyer with a financial compensation in the form of a refund. 

 

SEVEN SPORT s.r.o. 

Registered Office:  

 

 

Borivojova 35/878, 130 00 Praha 3, Czech Republic  

Headquarters:  

 

 

 

Delnicka 957, 749 01 Vitkov, Czech Republic 

 

 

Warranty & Service Centre:  

 

Cermenska 486, 749 01 Vitkov, Czech Republic 

 

CRN:    

 

 

 

26847264 

VAT ID:  

 

 

 

CZ26847264 

Phone:    

 

 

 

+420 556 300 970 

E-mail:   

 

 

 

[email protected] 

 

 

 

 

 

[email protected] 

 

 

 

 

 

[email protected] 

Web:    

 

 

 

www.insportline.cz 

 

SK 

INSPORTLINE s.r.o. 

Headquarters, Warranty & Service centre:   Elektricna 6471, 911 01 Trencin, Slovakia   

CRN: 36311723 

VAT ID: SK2020177082 
Phone:   

 

 

 

+421(0)326 526 701 

E-mail:   

 

 

 

[email protected] 

 

 

 

 

 

[email protected] 

 

 

 

 

 

[email protected] 

Web: 

 

 

 

 

www.insportline.sk  

Date of Sale: 

 

 

 

 

 

Stamp and Signature of Seller:   

 

Summary of Contents for IN 10664

















Reviews: