Insportline HG3060, Assembly Instructions Manual

Page: 7 / 10

- 7 -
7. Slide big washer (5) and rubber donut (3) onto guide rod (H).
8. Slide weight plate (T) onto guide rod (H), insert selector rod (U) into weight plate (T)
with pin (8).
9. Attach secure bushing (V) and secure pin (W) to selector rod (U), then slide top plate
(S) onto guide rod (H), attach swivel pulley block IV (R) with (16) and big washer (32)
to selector rod (U) as shown.
10. Attach joint beam (K) to straight beam (G) with big pulley (1) and (21), (29) and (30).
11. Attach straight beam (G) to upright frame (D) and guide rod (H) with (25) and (28).
12. Attach top joint tube (I), big pulley (1) and small pulley (2) to straight beam (G) with
(18), (20), (21), (22), (29) and (30) as shown.
13. Attach swivel pulley block III (Q) to top cross beam (J) with axes (F), bushing (4), (29)
and (13).
14. Attach top cross beam (J) to top joint tube (I) and joint beam (K) with (17), (19), (28)
and (29) as shown.
15. Attach joint rod (L) to top cross beam (J) with (23) and (29).