Insportline HG1092B, Owner'S Manual

Page: 11 / 13

STEP 05
23. Slide a foam roller (33) onto a support tube (25) and screw a securing cap (51) onto the end of the support
tube (25). Insert the other end of the support tube (25) through the hole in the leg lift (10). Slide another
foam roller (33) over the protruding end of the support tube (25) and screw a securing cap (51) onto the end of
the support tube (25). Repeat to assemble the foam rollers (33) into the hole in the seat frame (9).
24. Slide a foam roller (33) onto each foam support (15) on both sides. Screw a securing cap (51) onto the end
of the foam support (15).
25. Attach the short cable (39) to the pulley bracket on the upright (7) with a pulley (36), bolt M10*50 +
w nut (63). Hook the eyelet end of the short cable (39) to the ring on the upright (7) with a small quick
link (80).
26. Attach the lat bar (23) to the cable (38) with a quick link (56).
27. The straight bar handle (24) and ankle cuff (77) can be attached to the half ball end of the cable (38) at the
bottom of the leg lift (10) with two quick link (56) and the chain (57).
28. Attach the AB curl strap (35) to the ball end of the short cable (39) with a quick link (56). To use the AB
curl strap (35), connect the eyelet end of the short cable (39) to the cable (38) with the quick link (56).