3
SAFETY INSTRUCTIONS
Read the manual carefully before use and assembly and keep it for future reference.
Always check local laws and regulations.
Never use the detector in historical or archaeological sites unless you are authorized to do so.
Never leave dug holes unattended, always bury them after finding the object.
Respect private property and do not enter private property without the owner's consent.
For outdoor use only.
The control panel is powered by 2x AA batteries.
USE
LENGTH ADJUSTMENT
Loosen the nut on the bar clockwise.
Adjust the length of the bar and then slightly tighten with a nut counterclockwise.
The coil should be 1 - 5 cm away from ground and parallel to the ground. Once you have set the exact
height, secure with the nut counterclockwise. Do not overtighten the nut.
1.
Coil
5.
Control panel
2.
Coil bolt
6.
Handle
3.
Nut
7.
Strap
4.
Bar
BATTERY
The control panel is powered by 2x AA batteries.
1. Open the panel in the direction of the arrow.
2. Insert the batteries with the correct polarities. Close the cover.