Insportline Gilavar, User Manual

Page: 7 / 25

7
TREADMILL STRUCTURE
INSTALLATION SKETCH
Step 1: Put meter on the meter tube.
•
Use 2 pcs of Screw M8*20 with 2 pcs of
washer to solid the meter tube. (Don’t fasten screw at
first).
•
Use 2 pcs of Screw M8*60 with 2 pcs of washer, 2 pcs of nut to solid the meter tube. (Don’t
fasten screw at first).
•
Use 2 pcs of Screw M8*20 with 2 pcs of washer to s
olid the meter. (Don’t fasten screw at first).
•
After the machine is power on, push “Start”, if everything goes well, then fasten screws
mentioned in front steps.
Step 2
：
Disassemble connecting screw for base frame