12
CY-200W COMPUTER: Unscrew the back cover. Gently remove the battery and replace it with a new battery
model CR2032, the (+) side facing up.
SENSOR: Unscrew the back cover. Gently remove the battery and replace it with a new battery model CR2032,
the (+) side facing up.
Note: Be careful not to over tighten and strip the casing.
TROUBLESHOOTING
Display is black or very light
The battery power may be low. Try a new battery to make
sure the battery is installed correctly.
Display becomes dark or black
The unit is too hot. Place the unit in a shaded area, and it
should return to normal.
The unit operates slowly or struggled
The unit is too cold. Warm the unit and it should return to
normal.
Data in display varies enormously
Check your surroundings for electromagnetic or high energy
interference and move away from the source of interference.
Data in display shows slowly
It may be affected by low temperature factor but it didn't
influence the function reading. When the temperature rises,
the data reading/switch will back to the normal.
Current speed does not appear
It may be caused by the following situation. The distance &
position between magnet and sensor to adjust.
SPECIFICATIONS
Receiver
Speed Sensor
Operating Temperature
0°C – 40°C
0°C – 40°C
Storage Temperature
-10°C – 50°C
-10°C – 50°C
Emitted Frequency
N/A
122KHz
±
5%
Battery
3 volt lithium 2032 cell
3 volt lithium 2032 cell
Weight
30.6 grams
20 grams
Stopwatch Range
0 ~ 9 (hour): 59 (minute): 59 (second)
Accuracy 1/100 seconds
Time Range
0 ~ 9 (hour): 59 (minute): 59 (second)
Current Speed Range
0 ~ 99.9KM/0 ~ 62 Mile
Average Speed Range
0 ~ 99.9KM/0 ~ 62 Mile
Maximum Speed Range
0 ~ 99.9KM/0 ~ 62 Mile
(Trip)Distance Range
0 ~ 999.99KM/0 ~ 600 Mile
Odometer Range
0 ~ 9999.9KM/0 ~ 6200 Mile
Calories Used Range
9999 Kcal
