12
FLOOR PROTECTION
If you place a heavy chair on a wooden floor for long time, place a carpet or a mat under it to avoid
floor damage.
NOTE:
Don’t move the chair wheels on a wooden floor, rough ground or in narrow places. Two people
are required to lift the chair in this case. Cary the calf front sealing plate and the back cover (never lift
the armrest).
MOVING THE CHAIR
Make sure all the wires are away from the floor, if you need to move it. Focus on the groove of the
back cover, lift it in an angle (the centre of gravity is on the front caster). You can move the chair
forward, then restore the chair to the normal angle.
WARNING!
Always turn off the power switch and then unplug the power cord and remote-control wire
before moving the chair.
PRODUCT SPECIFICATION
Model
A192
Rated voltage
110-120~60 Hz
220-240V~50Hz/60Hz
Rated power input
150W
Rated time
20 min.
Electric device protection
Class I
Material introduction: PVC, PA, steel parts and electric and electron parts
ENVIRONMENT PROTECTION
After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the
local laws and environmentally friendly in the nearest scrapyard.
By proper disposal you will protect the environment and natural sources. Moreover, you can help
protect human health. If you are not sure in correct disposing, ask local authorities to avoid law
violation or sanctions.
Don’t put the batteries among house waste but hand them in to the recycling place.
