11
Step 8
Attach the rim AA to the board CC with bolts, washers, and nuts I1, I2, I3, I4 a L1, L2, L3, L4. Two
small springs R must be attached to the holes in the rim AA with bolts I1, I2, I3, I4.
Step 9
Attach rods S, T to the board CC with bolts, washer and nuts C1, C2, C4. To the shorted rod S than
attach to the middle holes bolts and washers E1, E2 to hold springs V.
Note
: The hole sizes in rods S, T will determine the location on the board.