3
Deluxe Tilt-in-Space Bath Chair
ASSEMBLY INSTRUCTIONS
Models BCCD-8500S Deluxe Bath Chairs (Small)
The small Deluxe bath chairs are shipped with the frame and seat
unattached.
1.
Reach inside the seat cover by opening the top fl ap of the mesh
cover.
2. From the inside of the seat, insert the bolts through the pre-drilled
holes in the plastic tubing, the through the holes in the plastic
frame. The cap nuts should then be screwed to the bolt ends
protruding on the outside of the frame.
3. Insert the tube at the rear of the seat back into the frame’s larger
tube by pressing the metal release button.
Models BCCD-8600M Deluxe Bath Chairs (Medium)
The medium Deluxe bath chairs are shipped with the seat already
attached to the frame.
1. Insert the tube at the rear of the seat into the frame’s larger tube
by pressing the metal release button.
2. Additionally, insert the tube under the seat front into the frame’s
larger tube by pressing the metal release button.
Models BCCD-8700L Deluxe Bath Chairs (Large)
The large Deluxe bath chair is shipped with the seat and frame
unattached.
1. Bolt the seat section to the frame using one bolt on each side.
2. Insert the tube under the seat front into the frame’s larger tube by
pressing on the metal release button.
Setting the Angle of Recline
1. Push the release button on the upright post. Slide the inner post
up or down, until the bottom locks into the desired position.
