5. Appliance specifications
6. Maintenance / Cleaning
7. Others (Service, Repairing, Guarantee, etc.)
Disconnect from mains before maintenance or cleaning.
The replaceable LED filament is fragile and can be easily broken if handled incorrectly.Ensure that your
fingers do not make contact with the lower section where the Yellow filaments are fitted.
Grip the solid upper section of the filament assembly and gently apply a backwards/forward movement
with your fingers whilst pulling downwards to remove.
After removing the old filament replace with new one by inserting into the socket, as with removal
only grip the solid upper section during installation.
WARNING: The use of any accessory not specified in this manual may present a risk of
personal injury.
This electric product is in accordance with the relevant safety requirements.
Repairs should only be carried out by qualified persons using original spare parts, otherwise This may
result in considerable danger to the user.
Please contact the store which you bought the product for after sale services if any.
The product is SELV class III lamp with approved class II LED driver.
4. Environmental protection
Electrical products must not be thrown out with domestic waste. They must be taken
to a communal collecting point for environmentally friendly disposal in accordance
with local regulations. Contact your local authorities or stockist for advice on recycling.
The packaging material is recyclable. Dispose of the packaging in an environmentally
friendly manner and make it available for the recyclable material collection-service.
Batteries must be recycled or disposed of properly. Do not dispose of batteries in regular
trash, municipal waste stream or by fire, as batteries may leak or explode. Do not open,
short circuit or mutilate batteries as injury may occur.
CAUTION!
TECHNICAL CHARACTERISTICS
Rated voltage
Rated wattage
Ambient Temperature
Protection class
IP number
Transformer
ClassII,INPUT:100-240V~50/60Hz
OUTPUT: 30V ,120mA
26V/30V
25°C
Class III
IP 44
3.6W
FR
ES
PT
IT
EL
PL
UA
RO
EN
22
Replacement lamp
Battery characteristics
30V Max. 0.6 W.
.
3.7V 1500MA LI 18650X1
Max 25M/50LEDs for the lighting chain interconnected
.
When hanging the lighting chain,needs 10 supporting point for 10 bulbs
This product contains a light source of energy efficiency class <F>-(EU) 2019/2015