IMPORTANT!
Guide Rods must be
2 - 1 ¾” Hex Bolts
in Front of plate.
4 -
3/8” Flat Washers
2
-
3/8” Lock Nuts
FINGER TIGHTEN ONLY
Main Upright
2 - 4” Hex Bolts
4 - 3/8” Flat Washers
2 - 3/8” Lock Nuts
FINGER TIGHTEN ONLY
Step 5: Attach Main Upright to Main Base using:
Two (4” Hex Bolts)
Note: Finger Tighten Only
Four
(3/8”
Flat
Washers)
Two (3/8” Lock Nuts)
Step 6: Attach Guide Rods to Main Upright using:
Two (1 ¾” Hex Bolts)
Note: Finger Tighten Only
Four
(3/8”
Flat
Washers)
Two (3/8” Lock Nuts)
Page 9
STEP 5
STEP 6
