Ignite Wired
Press and hold 'CH MODE' and 'BOOST CH' keys together on
the Room Thermostat until C5
is displayed.
Ignite Wireless (March 2021 onwards)
Long press BOTH buttons on the Receiver until '1 and WiFi'
lights flash.
Using the LEFT button, cycle through the menu until 'CH'
flashes.
Press the RIGHT button, 'CH' will rapidly flash.
Ignite Wireless (March 2021 and earlier)
Short press the pairing (middle) button on the Relay
Module, this will make all three lights
flash green.
Then press the CH button, The CH button will now flash
green.
Ignite Wireless (3ch2,3ch)
Long press the two outside buttons on the Relay Module,
this will make all three lights flash
green.
Then press the CH button, The CH button will now flash
green.
Smart Sensor
Press and hold \/ button for 5 seconds. All 5 LED's will slowly
flash to indicate unit is in pairing mode.
Upon successful pairing, the centre LED on the Smart Sensor
will rapidly flash.
If pairing fails, the two outside LED's will rapidly flash. Please
try the pairing procedure again.
