background image

Page | 12 

 
 

REGULATORY INFORMATION 
Federal Communication Commission Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in an individual installation. If this equipment 
does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by 
one of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the distance between the bike and the affected receiver. 

 

Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure 
continued compliance, any changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate this equipment.

 

FCC Radiation Exposure Statement  

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with a minimum distance of 20 
centimeters between the radiator and your body. This transmitter must not be co-located or 
operating in conjunction with any other antenna or transmitter. The antennas used for this 
transmitter must be installed to provide a separation distance of at least 20 cm from all persons 
and must not be co-located or operating in conjunction with any other antenna or transmitter.  

IC Statement 

This device complies with Industry Canada license-exempt RSS-210 standard. Operation is 
subject to the following two conditions: (1) this device may not cause interference, and (2) this 
device must accept any interference, including interference that may cause undesired operation 
of the device. 

 
Hazardous Materials and Proper Disposal 

The batteries within self-powered equipment contain materials considered hazardous to the 
environment. Federal law requires proper disposal. 

Product Recycling and Disposal 

This equipment must be recycled or discarded per applicable local and national regulations.  
Product labels, in accordance with European Directive 2002/96/EC concerning waste electrical 
and electronic equipment (WEEE), determine the framework for the return and recycling of 
used equipment as applicable throughout the European Union. The WEEE label indicates that 
the product is not to be thrown away, but rather reclaimed upon end of life per this Directive. 
In accordance with the European WEEE Directive, electrical and electronic equipment (EEE) is to 

Summary of Contents for IC 1.5
















Reviews: