Inspire 1 Pro Release Notes
©
2017 DJI. All Rights Reserved.
2015.11.24
4.
Upgrade the firmware to v1.1.0.40.
5.
Upgrade the DJI GO app iOS to v2.4.2.
6.
Upgrade the DJI GO app Android to v2.4.1.
Major Updates
1.
Updated list of compatible lenses: Olympus 25mm/f1.8, 45mm/f1.8 and 14-42mm/f3.
5-5.6 EZ.
2.
Increased the sensor’s pixel bit-width from 10bit to 12bit for the following modes: 4KP30/25/24,
2.7KP30/25/24 and 1080P30/25/24.
3.
Improved the autofocus accuracy by enabling the Zooming-AF feature.
4.
Improved the image quality by fine tuning the sharpness and contrast.
5.
Increased the shutter speed upper limit from 1/2 s to 2 s when shooting in ‘A’ mode.
6.
Fixed issue of the white balance tending to be warm in the daylight.
7.
The DNG format now supports the noise profile and sharpness profile.
8.
Fixed issue of occasional flickering exposure changes in Auto Exposure mode.
9.
Fixed issue of corrupted DNG due to missing lens profile.
10.
Optimized system stability.
11.
Optimized the gimbal control parameters for better performance.
12.
Optimized the Waypoints feature. Released the Follow Me feature.
Note:
1.
The firmware can be downgraded to v1.0.0.30 or later only.
2.
The Waypoints feature is only supported by the
DJI GO app iOS v2.4.2.
Support for the
Android
version is
coming soon.
3.
The following table shows the recommended DJI Balancing Ring and filter for each lens model. Attach either a
DJI Balancing Ring or filter only. DO NOT attach a lens hood.
Model
DJI Balancing Ring
Filter
Lens Hood
Thread Size
Weight
Olympus M.Zuiko Digital ED 17mm f/1.8
BR-
Φ
46-33
46 mm
33 g
Not required
Olympus M.Zuiko Digital ED 25mm f/1.8
Not required
46 mm
10 g
Not required
Olympus M.Zuiko Digital ED 45mm f/1.8 (For
still photography)
Not required
37 mm
14 g
Not required
Olympus M.Zuiko Digital ED 14-42mm f/3.5-5.6
EZ (For still photography)
BR-
Φ
37-23
37 mm
23 g
Not required
