3
◎
The two plastic washers are for the purpose of protecting mirror surface. Please place one of the
washers inside of the drawer and place the other one between front of the drawer and drawer
knob.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry
or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
3
a
Using bolt (G) and allen wrench (I) again, attach stretcher (E) between left panel (C) and right
panel (D). Please
tighten all bolts at this step.
4
Carefully turn the assembled unit upright.
Remove drawer knob w/ plastic washers (F) from inside of the drawer and reattach on drawer
front as shown. The mirrored desk assembly is now complete.
Remove drawer knob w/ washers (H) from inside of the drawer and reattach on drawer front as
shown. The desk assembly is now complete.
