
Insoric RealPower / 10.06.2016
14 / 34
2.6.2 Measuring the wheel diameter
The wheel diameter is measured using the wheel measuring device
*
supplied with the product and
subsequently entered in the RealPower software program.
The wheel diameter should be measured horizontally, as in that
position there is always sufficient space between the wheel and the
wheel arch.
To obtain the precise measurement, the diameter must be
measured horizontally though the centre of the hub.
*
RealPower Dyno-System Professionell
2.7 Analysing the data
2.7.1 Starting the RealPower software
When the RealPower software is installed, a desktop shortcut is automatically created.
The shortcut is displayed as an icon.
To start the RealPower software you require the licence key (see Section 1.8). Plug the USB stick (see
Section 1.3, item 10) on which the licence key is stored into an available USB port on your PC.
Double-clicking the program icon will then start the user interface of the RealPower software.