5
6
Ⅲ
.
Application
3.1 Turning on
After installation, connect the DC output to the “PWR in” port of
the main system, and then connect the AC power adapter in
accordance with the requirements. Turn on the master power switch.
LED ring lamp will light, mainframe enter the system, the screen
show “WELCOME”.
The power of the adaptor: 100-240V AC 50Hz/60Hz
The mainframe working power: 12V DC 3A
The light source adopts LED ring
lamp, divided into the LED circular
indicator with adjustable brightness
and the multiple function LED circular
indicator controllable at four zones.
The lower light source is optional on
requirements to facilitate observation
of different objects. The lower light
source is supplied by the PWR out at
the rear of the machine by connecting
the PWR out of the machine and the
input port at the upright column with a
connection line.
3.2 Operation buttons and function
1
2
3
4
5
6
7
8
9
1. Power on/off 2. Increases or decrease the brightness of lamp
3. Light switch respectively to control the four-region on or off
4. Self-definition linear converting
5. Linear color converting 6. Menu / confirm 7. Real time view / playback
8. Screen data display 9. Take pictures or take video
Shown on the upper left corner is the quantity of photos to be
taken available at present or the video recording time (with 143
indicating 143 photos available to betaken at the present setup
mode; 50:24 indicating the time for video recording at the
present setup mode as 50min 24sec).
3.3 Data show on the LCD screen
Shown on the upper right corner
is the mode of photo taken
or the mode of video recording.
Shown on the lower left corner is the pixels of photos taken (
2048
×
1536 indicating the pixels for photo taken at the present
setup mode as 2048
×
1536; 320
×
240 indicating the pixels for
video recording at the present setup mode as 320
×
240).
“C” shown on the lower right corner means that SD card is
inserted in the machine
3.4The illumination control of the mainframe
The brightness of LED lamp may be increased or decreased with
the help of
and
,
is respectively used to turn on/off
for the corresponding four corners of LED indicator.
If the light throw back from the object is too sharp, user can install
a ground glass on the LED ring lamp. It can improve the image
quality. (This ground glass need to order)
