3M 09/07
PRINTED IN USA
Information and specifications subject to change without notice
Note: For all rough in connections see Installation and Layout Detail Drawing.
SPECIFICATIONS
CONSTRUCTION -
Hood and tank constructed of 16 gauge type 304 S/S. Hood of all welded seamless construction. S/S frame,
legs, and feet. All internal castings are non-corrosive nickel alloy, bronze or S/S.
DOORS -
Extra large die formed type 304 S/S front inspection doors riding in all S/S channels. No plastic or nylon sleeves or
liners used. Two intermediate S/S door safety stops.
CONVEYOR -
One S/S roller chain conveyor, with rack driving lugs every sixth link, running along the front of the machine. 15
free spinning rollers placed along the back wall of the machine. Conveyor accommodates all standard 20" racks. Conveyor drive
system includes direct drive gear motor with frictionless, trouble-free clutch system, spring-loaded and automatically re-engaging.
Racks conveyed automatically through washing and rinsing systems, powered by an independent 1/15 HP drive motor.
PUMPS -
Centrifugal type "packless" pump with brass petcock drain. Construction includes ceramic seal and a balanced cast
impeller on a precision ground stainless steel shaft. All working parts mounted as an assembly and removable as a unit without
disturbing pump housing. One HP motor for each wash and rinse pump, 1/2 HP motor for prewash pump: standard horizontal
C-face frame, drip proof, internally cooled with ball-bearing construction.
CONTROLS -
Top mounted NEMA 12 control enclosure, with 3.5” air gap between hood and enclosure, housing motor overload
protection, contactors, transformers, and all other dishwasher controls. All controls safe low voltage 24 VAC.
ENERGY SAVER -
Rack actuated lever automatically operates the final rinse solenoid only when a rack passes, saving water and
energy. The lever also activates an adjustable timer control. If no ware passes during the set time, the machine shuts down.
SPRAY SYSTEM -
Spray arms made of type 304 stainless steel pipe. Spray assemblies removable without the use of tools.
PREWASH -
One manifold above and one manifold below, each with 3 high pressure cleaning nozzles.
WASH -
Upper and lower manifolds with CrossFire
®
System (patented). One manifold above with 3 power wash arms, each
with 9 high pressure cleaning slots and one manifold below with 3 power wash arms, each with 9 high pressure cleaning slots. The
slots are precision milled for water control producing a fan spray. Wash arms are fillet welded to the S/S manifold. The CrossFire
®
System provides 4 horizontally spraying high pressure nozzles.
RINSE -
Upper and lower manifolds. One manifold above with 3 power rinse arms, each with 9 high pressure rinsing slots and
one manifold below with 3 power rinse arms, each with 9 high pressure rinsing slots. The slots are precision milled for water
control producing a fan spray. Rinse arms are fillet welded to the S/S manifold.
FINAL RINSE -
Six nozzles above and three nozzles below threaded into S/S schedule 40 pipes. Nozzle assemblies produce
a fan spray reducing water consumption, maximizing heat retention.
DRAIN -
Drain valves externally controlled. Overflow assembly with skimmer cap is removable without use of tools for drain line
inspection. Heaters protected by low water level control.
Capacity
per hour
Final rinse
consumption
at 20 psi
* Exhaust
requirements
Peak rate
drain flow
Shipping
weight
Current draw
amps
Steam
Electric
w/o booster
Tank capacity
Motor size
Electric usage
Final rinse
peak flow
at 20 psi min.
277 racks
6,925 dishes
300-600 meals
144 gals./hr.
.52 gals./rack
350 CFM Load
350 CFM Unload 23 gals./min.
1200 lbs.
8 gals. (prewash)
12 gals. (wash)
13 gals. (rinse)
1/2 hp (prewash)
1 hp (wash)
1 hp (rinse)
1/15 hp (conveyor)
8 kw wash tank
15 kw rinse tank
15 kw booster 40°rise
27 kw booster 70°rise
81 lbs./hr tanks
51 lbs./hr booster 40°rise
90 lbs./hr booster
3.7 gals./min.
Steam
consumption at
20 psi min.
208/3/60 ......................13.1 ................................ ..76.9
230/1/60 ......................24.1 ................................ 119.8
230/3/60 .....................11.6 ................................ ..67.3
380/3/60 ........................7.2 ................................ ..42.2
460/3/60 ...................... 6.0 ................................ ..33.6
SPEEDER 86-3
* Note—Exhaust requirements are for pant leg connections only. For hood type, CFM requirements vary, consult hood manufacturer
for specific sizing.
