SPECIFICATIONS
Flush Water Characteristics:
Rated Flow– 6 gpm at 15 to 125 psi (fresh or sea water)
Inlet Size– 3/4 inch for fresh water and sea water
Outlet Size– 2 inch flanged outlet, MIL-F-20042, 150 series plain
Electrical Power Requirements:
Power Supply– 440 VAC, 3 PHASE, 60 HZ
Operating Current– approximately 4.3 Amperes
Maximum Power Demand– 15 Amperes (limited by main circuit breaker)
Motor:
3 HP, 208-203/460 Volts, 60 Cycle, 3 Phase, Totally Enclosed
Shipping Weight:
440 lbs. (approximate)
Unit Height– adjustable up to 34” + 1”
Unit Length– 32 3/8” overall
Equipment Supplied:
The food waste disposal system is shipped from the factory assembled and attached to a shipping pallet. Loose
parts are also attached to the shipping pallet. These parts require separate mounting adjacent to the installed
system and include:
An electrical control panel.
Valves and related controls for water supply lines.
A remote “start/stop” pushbutton station.
Interconnecting electrical cables and external pipe and fittings are to be furnished by the installing activity.
ITEM DESCRIPTION
ITEM DESCRIPTION
1
Electrical Control Panel
10
Drive Motor
2
System Disconnect Switch
11
Manual Shutoff Valve
3
Start/Stop Pushbutton Station 12 Flow
Regulator
4 Start
Pushbutton
13 Strainer
5
Stop Pushbutton
14
Feed Chute
6
Power On Light
15
Pulper Tank
7
Motor Run Light
16
Pulper Leg
8
Electrically Operated Value
17
Selector Switch
9
Feed Chute Interlock Switch
18
Dam
19 Backflow
Preventer
20 Vent
Tube
21 Drain
Valve
22 Outlet
Flange
23 Table
Gasket
P3-NSU GARBAGE GRINDER
