62
32"/55" 1080p, 60Hz, LED Insignia Roku TV
www.insigniaproducts.com
Changing time settings
You can change time settings to suit your preferences. You can find the following settings by navigating from the
Home
screen menu to
Settings > Time
:
•
Sleep timer
—Set a time delay after which your Insignia Roku TV will automatically shut off. This setting reflects the
setting you can make in the
Options
menu from any TV input, as explained in
on page
. Note
that the sleep timer setting is not input specific.
•
Time zone
—Select whether to set the time zone automatically or manually, and if set manually, select your current
time zone. Typically, a TV connected to the Internet can discover its own time zone automatically, and a TV that is not
connected to the Internet must be set manually. Initially, this setting is made when you set up the TV tuner, as
explained in
on page
. Correct time zone information is needed to correctly display program
data.
•
Clock format
—Select whether to display time in a 12-hour or 24-hour format, or to turn off time display. This setting
is available only on TVs that are connected to the Internet. Non-connected TVs do not display time.
Scanning for broadcast TV channels again
There will be times when you need to create a new channel list. For example, you:
• Change cable providers
• Reorient your Insignia Roku TV antenna
• Move to a different city with different channels
Whenever you need to update your TV channel list, you can repeat the channel scan.
To repeat the channel scan, from the
Home
screen menu, navigate to
Settings > TV inputs >Antenna TV> Scan again
for channels. Then select
Start finding channels
to begin the channel scan process. The screens and options that
appear during this process are identical to those described in
on page
Using your Insignia Roku TV in a home theater
Your Insignia Roku TV has several features that make it an ideal TV for a home theater. But you might not notice them
because they remain in the background until you decide to use them.
Turning off Insignia Roku TV speakers
When you use your Insignia Roku TV with a sound bar or an external amplifier and speakers, you’ll probably want to turn
off the internal TV speakers.
To turn off your Insignia Roku TV’s built-in speakers, in the
Home
screen menu, navigate to
Settings > Audio > TV
speakers
and change the setting.
Changing the audio mode
Your Insignia Roku TV has two audio modes, accessed by navigating in the
Home
screen menu to
Settings>Audio>Audio mode
:
•
Stereo
—Use this setting for internal speakers, headphones, and external stereo amplifiers connected through
HDMI ARC, SPDIF optical, or headphone jack.
•
Auto
—Use this setting to automatically detect the best audio setting based on the audio stream in the content
you are watching. If you have connected your Insignia Roku TV to an external Dolby Digital or Dolby Digital Plus
compatible amplifier, receiver, or sound bar through HDMI ARC or SPDIF optical, your Insignia Roku TV
automatically selects the appropriate surround sound capabilities of the device based on the characteristics of the
current program.
Tip
Repeat the channel scan from time to time to make sure you are receiving all of the
latest channels. Broadcasters add and remove channels, move channels to different
parts of the spectrum, and change the power levels of their channels periodically.
Tip
Your Insignia Roku TV’s internal speakers can be enabled and disabled automatically
as needed by system audio control, as described in
on
page
. The internal speakers are also turned off when you use the headphone jack.
