42
32"/55" 1080p, 60Hz, LED Insignia Roku TV
www.insigniaproducts.com
Setting up Antenna TV
Despite all of the entertainment possibilities of your Insignia Roku TV, you may also want to watch broadcast TV. You
watch broadcast TV in much the same way you watch other entertainment choices. You select a tile—the
Antenna TV
tile—from the
Home
screen.
The first time you select the
Antenna TV
tile, you have to set up the TV tuner. Setting up the TV tuner scans for active
channels and adds them to your broadcast TV channel list.
Why do I have to set up the TV tuner?
You might be asking, “Why is this step necessary?” Good question.
Not everyone needs to use the TV tuner. For example, you might have a set top box provided by a cable or satellite
company that receives all of your channels. Most of these set top boxes use an HDMI® connection.
More and more people are watching only streaming TV and do not have a TV antenna or cable/satellite service. If you
don’t need the TV tuner, you can bypass setting it up and instead remove it from the
Home
screen as explained in
on page
When you set up Antenna TV, your Insignia Roku TV scans the signals on its antenna input for channels with a good
signal, and adds those to the channel list, skipping dead channels and channels with a very weak signal.
Your Insignia Roku TV will, however, let you add two analog channels, even if they have no signal. You might need to
add these channels if you have an older set top box, VCR, or game console that can only output a signal on analog
channel 3 or 4. These are the only channels that can be added regardless of whether they have a good signal. Typically,
you'll only need one of these channels, but both are provided to make setup simpler. You can hide the one you don’t
want as explained in
Edit broadcast TV channel lineup
on page
How do I set up the TV tuner?
Setting up the TV tuner is easy—your Insignia Roku TV does most of the work. You just have to answer a couple of
questions.
1
Make sure your antenna (sold separately) or TV cable is connected to your Insignia Roku TV’s
ANT/CABLE
input.
2
On the
Home
screen, select the
Antenna TV
tile.
3
Read the simple on-screen instructions and select
Start setup
.
4
If prompted, select your time zone. You'll only need to do this if your Insignia Roku TV can’t figure out your time zone
from your Internet connection.
