background image

2

  Align the intake tube on the back of the frame with the mouth 

of the inflator pump, then wrap the attached strap around the 
mouth of the pump and attach tightly. 

Attaching the screen

• 

Connect the clips along the edges and corners of the frame to 
the screen. 

Inflating the screen
1

  Make sure that the air intake is clear of obstructions and that 

the frame’s zipper is closed completely.

2

  Plug the pump’s power cord into a power outlet to inflate the 

frame.

 Note

: The pump must be left running while screen is in use.

Before using your new product, please read these instructions to prevent any damage.

QUICK SETUP GUIDE

96” Outdoor 

Inflatable 

Screen

NS-SCR116 

Flat size (W×H): 21.2 x 11 in (538.48 x 279.4  mm.)
Folded size (W×H): 5.3 x 11 in (134.62 x 279.4  mm.)

•  Tethers (4 long, 4 short)

•  Pump stakes (2)

• Storage 

bag

• 

Quick Setup Guide

3

  Attach the four long tethers to the upper X-shaped straps on 

each side of the frame (two on each side).

4

  Attach the four short tethers to the lower X-shaped straps on 

each side of the frame (two on each side).

5

  Stand the inflatable screen upright, then insert the yellow 

tether stakes through the tethers and into the ground. Make 
sure that the tethers are taut.

6

  Insert the two orange pump stakes through the plastic legs of 

the pump to secure the pump to the ground.

Top

Bottom

Intake tube

Pump stakes

Long tethers

Top

Bottom

Short tethers

Top

Bottom

Tether stakes

PACKAGE CONTENTS

• Projector 

screen

• Inflatable 

frame

• Pump

•  Tether stakes (14)

YOU’LL NEED

• Hammer

• Projector

•  Sound system (Built-in projector speakers may not provide loud 

enough audio outdoors.)

FEATURES

SETTING UP YOUR SCREEN

Attaching the pump
1

  Lay out the deflated frame on a flat surface that is clear of debris. 

Make sure that the side with the clips faces up.

 Note

: Select a location where the pump is well-ventilated and the power cord 

can reach a power outlet.

Frame

Screen

Tethers

Pump

Tether stakes

Pump stakes

NS-SCR116_16-0493_QSG_V1_EN.ai   1   7/11/2016   10:04:03 AM

NS-SCR116_16-0493_QSG_V1_EN.ai   1   7/11/2016   10:04:03 AM

Reviews: