16
NS-RTM18BS8/NS-RTM18WH7/NS-RTM18SS7/NS-RTM18BKR8/
NS-RTM18WH7-C/NS-RTM18SS7-C
www.insigniaproducts.com
Installing an optional ice maker
The refrigerator comes set up for ice maker installation. This refrigerator is
compatible with the Insignia NS-IMK20WH7 ice maker.
Maintaining your refrigerator
Your refrigerator is designed for year-round use with only minimal cleaning and
maintenance.
When you first receive it, wipe the cabinet with a mild detergent and warm water,
then wipe dry with a dry cloth. Do this periodically to keep your refrigerator
looking new.
1
Turn off the refrigerator and unplug it from the wall outlet.
2
Remove all food.
3
Wash the inside with a damp warm cloth soaked in a solution of one quart of
lukewarm water to two tablespoons of baking soda solution.
4
Be sure to keep the door gasket (seal) clean to keep the refrigerator running
efficiently.
5
Dry the interior and exterior with a soft cloth.
Defrosting the freezer
This refrigerator is frost free, so you don't need to defrost it. You just need to clean
it periodically, following the above instructions.
Changing the interior LED light
1
Using a Phillips screwdriver, remove the screw securing the lamp cover, then
remove the lamp cover.
2
Remove the LED light bulb from the lamp base, then install a new LED light
bulb.
3
Reinstall the lamp cover with the screw you previously removed.
CAUTION:
To prevent damage to the finish, do not use:
• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners.
Remove screw
LED light model: 50241001001C
Lamp base: E12
Input rating: 115V AC 3.5 W
