Insignia NS-RMT3D18, User Manual

Page: 3 / 64

4 Press either 0 (for cable/satellite/
streaming), 1 (for TVs), or 2 (for
Blu-ray/DVD) to select the device
type you want to set up.
5 Find your device type and brand
in the table below, then press and
hold its number until your device
turns off . Setup for that device is
complete.
Note : If your brand does not appear in
the table below, use “Setup method B:
Direct code entry” or “Setup method C:
Code search.”
# TV
CABLE / SATELLITE
/ STREAMING
BLU-RAY/
DVD
1 Insignia AT&T Insignia
2 LG Bell LG
3 Panasonic Comcast, Xfi nity Panasonic
4 Philips,
Magnavox Cox Communications Philips,
Magnavox
5 Samsung DIRECTV Pioneer
6 Sharp DISH Network Samsung
7 Sony Frontier
Communications,
Verizon Sharp
8 TCL Rogers Sony
9 Toshiba Shaw Toshiba
0 VIZIO Spectrum Yamaha
Setup method B: Direct code
entry
1
Turn on your target device.
2 Press TELEVISION or
CABLE / SATELLITE /
STREAMING , or BLURAY/
DVD to select the mode you want
to set up.
3 Press and hold SETUP until your
remote’s LED blinks twice.
4 Enter the fi rst 5-digit code for your
brand from the code list (see TV
CODE LIST on page 12).
5 Press the (power) button to test
your device. Release the key when
your device turns off . Setup for that
device is complete.
6 If the device does not turn off ,
repeat steps 2-5 using the next
code for your brand or use “Setup
method C: Code search”.